Home/Cabinetry terms/Custom vs. factory finish
Cabinetry 101

Custom vs. factory finish

A factory finish is one of the maker's standard colors. A custom finish is a color mixed to order. On the lines we carry, both are applied at the factory before the cabinets ship. Here's how they compare, where you can get a custom color, and what changes if you paint cabinets on site instead.

Side by side

Standard or custom color?

Most kitchens use a standard color, and the range across our lines is wide. A custom color makes sense when you have a specific color in mind that no line offers.

Standard color
Custom color
What it is
Standard colorOne of the maker's own colors, shown in our catalog.
Custom colorA color mixed to order, picked from a paint brand or matched to a color you bring.
Where to get it
Standard colorEvery line we carry.
Custom colorSelect lines. See the options below.
Seeing it first
Standard colorMany standard colors have a door sample in our showroom.
Custom colorYou choose from the paint brand's color. Ask your designer about seeing a sample.
Timing
Standard colorThe line's usual lead time.
Custom colorMade to order. Ask your designer how it affects your schedule.
Touch-ups later
Standard colorFabuwood and KCD sell touch-up kits in their colors.
Custom colorKeep the paint brand and color code. A paint store can match it from a door or drawer front.
Custom colors

Want a color that isn't in the catalog?

You can still get a factory finish. These lines will finish their doors in a color you choose.

Fabuwood

Any Sherwin-Williams or Benjamin Moore color

Available on six Allure doors: Galaxy, Luna, Fusion, Echo, Luxe and Nexus. Add the door's custom paint color option to My Selections and enter the paint brand and color.

See custom color doors
Plain & Fancy

Custom color matching

Every Plain & Fancy door is built to order, and Plain & Fancy will match a custom color. Bring the color you have in mind to your design consult.

About Plain & Fancy
J&K, Northville and KCD

The maker's own color line

We offer these lines in their standard colors: 18 J&K, 15 Northville and 16 KCD finishes in our catalog, from whites and grays to wood tones.

At the factory

Five stages, in order.

Standard or custom, the color goes on the same way. Each maker has its own recipe, but a factory finish follows the same basic order, repeated and checked so every door in your kitchen matches.

  1. 01

    Sand

    Every part is sanded smooth so color goes on evenly. Many makers sand by hand as well as by machine.

  2. 02

    Add color

    Stain is wiped into the wood to bring out the grain, or paint is sprayed on in even coats. Glazes are added by hand.

  3. 03

    Seal

    A sealer protects the wood and gives the next coats something to hold on to.

  4. 04

    Topcoat

    A clear protective coat goes on last to help the finish resist scuffs, moisture and everyday cleaning.

  5. 05

    Inspect

    Parts are checked for color and surface flaws, touched up if needed, then assembled and packed.

J&K Cabinetry

J&K's catalog lists ten steps for its stained finishes, starting with sanding and an equalizing stain to even out the wood, and ending with a protective topcoat.

Plain & Fancy

Plain & Fancy sands every component by hand. Stains and glazes are applied by hand, paints are sprayed on an automated finishing line, and specialty finishes such as brushmark crackle take 11 steps.

Painting on site

Why not paint them after they're installed?

Some people buy cabinets and have a painter finish them in place. It can work, but it changes where and how the finish goes on. Here's how the two compare.

Factory finish
Finished on site
Where it's done
Factory finishAt the factory, before the cabinets ship.
Finished on siteIn your home or a local shop, after the cabinets are built or installed.
Conditions
Factory finishA dedicated finishing area where dust, temperature and humidity are managed.
Finished on siteWhatever the room or shop allows. Dust, temperature and humidity are harder to control.
How it goes on
Factory finishSprayed, wiped or hand-applied in set steps, with sanding and inspection along the way.
Finished on siteBrushed, rolled or sprayed by a painter, often over a factory or raw surface.
Color choices
Factory finishThe maker's color line, plus custom colors on some lines.
Finished on siteAny paint color you can buy.
Your schedule
Factory finishCabinets arrive finished and ready to install.
Finished on sitePrep, painting and drying add time on site after the cabinets go in.
Touch-ups
Factory finishSeveral makers sell touch-up kits matched to their colors.
Finished on siteDepends on the painter and on keeping leftover paint.
Before you decide

Choosing a finish you'll be happy with.

See it in person

Screens and photos rarely show a finish accurately. Finishes marked In showroom have a door sample on display.

Finishes on display

Check it in your light

Daylight, warm bulbs and nearby counters and floors all change how a color reads. Look at samples at different times of day.

Expect wood to vary

Stain shows the natural grain and color of the wood, so no two doors are exactly alike. That variation is part of a wood finish.

Keep a touch-up kit

Several of our makers offer touch-up kits matched to their colors. Ask about one when you order.

Not sure which finish fits?

Your first design consult is free. A C&S Cabinetry designer can compare finishes with you in the showroom and plan your kitchen around the one you choose. We can install the cabinets too.